Part Number Hot Search : 
ML4658CP ISL22326 AD8630 WRB4812 MAXQ1010 90BIP SY5802 M5S33
Product Description
Full Text Search
 

To Download NE3002-VA30A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Tentative Printheads
NE3002-VA30A
Near edge thermal printhead (300 dots / inch)
NE3002-VA30A
NE-VA30 series are the thermal printheads developed for high-speed / high-resolution printing for the market of bar-code printer & scale-printer, based on "step-free" structure. These printheads realize ultra-highspeed printing with long life & high reliability.
Applications Bar code printer Label printer Packaging printer ATM Ticket printer
Features 1) High dot reproducibility with step-free structure. 2) About 8 head inclination by near-edge structure, applicable to the large-size platen. Resin type thermal-transfer ink-ribbon can be used. 3) High-hardness protect cote type "W-coat" is employed with 150km abrasion life-time. 4) Even without history-control, high-speed printing more than 300mm / s can be achieved at 300dpi with clear print image. With history-control, 500mm / s printing is also possible at 300dpi.
External dimensions (Unit : mm)
7.1040.3
DOT No.640
660.5
54.208
DOT No.1
60.5
400.3
200.3
(13)
(5.896)
SECTION A
34.00.5
MAX.51
Print Di
rection
3 H10 Length 4
MAX.4.5
MAX.11
7.30.3
3 H10 Effective Depth 3
#2
#20
#4
#1
M3 Effective Depth 3
CONNECTOR A
CONNECTOR B #19
#1
TYPE OF PRINTHEAD
24.4550.3
0369UB
Rev.A
1/3
Tentative Printheads
Equivalent circuit
DOT#640
NE3002-VA30A
DOT#1
VH
220F 35V
GND
BEO
STB2
STB1
LAT
LATCH
DI
640
1
CLK
VDD 0.1F 50V GND
TM
TM
DI No. DI
DOT No. 640 to 1
STB No. STB2 STB1
DOT No. 640 to 321 320 to 1
Rev.A
2/3
Tentative Printheads
Pin assignments
No. 1 3 5 7 9 11 13 15 17 19 Circuit VDD GND N.C. LAT GND N.C. VDD STB1 TM SENS2 No. 2 4 6 8 10 12 14 16 18 20 Circuit BEO DI CLK GND N.C. GND STB2 TM SENS1 SENS3 No. 1 2 3 4 5 6 Circuit VH VH VH GND GND GND
NE3002-VA30A
Characteristics
Parameter Effective printing width Dot pitch Total dot number Average resistance value Applied voltage Applied power Print cycle Maximum number of dots energized simultaneously Maximum clock frequency Maximum roller diameter Running life / pulse life Operating temperature Symbol - - - Rave VH PO SLT - - - - - Typical 54.2 0.0847 640 850 24 0.59 0.28 640 8 Unit mm mm dots V W / dot ms dots MHz mm km / pulses
50
150 / 108 5 to 45
C
Rev.A
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1


▲Up To Search▲   

 
Price & Availability of NE3002-VA30A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X